2 Winding Heads Electrical Motor Automatic Stator Winding Machine
for Washing Machine
This machine has two winding heads with four working station. The
main phase and auxiliary phase can be wound simultaneously. It is
suitbale for high production capacity, high slot filling rate,
small slot opening stator coil winding. Different winding mode can
be selected in the touch screen, like auto skip, auto cutting and
Other parameter also can be set in the touch screen, like
continuous/discontinuour winding method.
Main Technical Data
|SMT-LR100 SMT-LR150I SMT-LR150 II SMT_LR200||SLR70||QLR70|
|Winding Head||1 1 1 1||2||4|
|Wire Diameter(mm)||0.3~1.0 0.3~1.0 0.3~1.2 0.3~1.2 0.3~1.2||0.2~1.0||0.2~1.0|
|Unload Speed||≤2500r/min ≤2500r/min ≤2500r/min ≤2000r/min||3000||3000|
|Stack Height||≤80mm ≤120mm ≤150mm ≤230mm||≤70mm||≤70mm|
|Winding Precision||+ 0 + 0 + 0 + 0||+ 0||+ 0|
|Power Supply||380v/50/60HZ 8Kw 8Kw 9Kw||7Kw||7Kw|
|Air Pressure||≥0.6Mpa ≥0.6Mpa ≥0.6Mpa ≥0.6Mpa||≥0.6pa||≥0.6pa|
|Weight||≈1350Kg ≈1600Kg ≈1600Kg ≈2200Kg||≈1950Kg||≈2300Kg|
|180×110×200 180×120×220 180×130×230 220×180×250||180×130×205||135×100×180|
The automatic stator winding machine has 2 winding heads working
stations with turntable. It can wind coils directly and orderly
into transfer cups. Especially suitable for stators with high slot
fill factor and small slot opening. It's easier for operators to
insert the coils of stators with high slot fill factor and small
slot opening width. So the automatic stator winding machine can
save labor effectively.
1. Automatic put the coil into transfer former orderly; Able to
exactly wind coils onto the forklike flywheel and easily transfer
the coil to coil inserter, with high efficiency and great inserting
2. Double winding heads automatic stator winding machine; the
electric motor coil winding machine is a double-station automatic
vertical winding machine, The turntable is two stations structure.
3. The stator winding machine adopts servo system to rotate and
index transfer form. Winding mode such as automatic skip, automatic
cutting and automatic indexing can be finished successively at one
4. Each coil winding machine has one set winding tooling and three
vertical winding forms.
5. Especially suitable for stators with high slot fill factor and
small slot opening;
6. The whole set of tooling can be changed, and it takes about
7. Main spindle is controlled by servo motor. The coil turn number
accuracy is ±1 turn.
8. PLC can set Parameters, turn number, winding speed, winding
tension, tooling sunk height, tooling sunk speed and winding
direction is adjustable.
9. Obtain continuous or discontinuous winding way and meets the 2
poles, 4 poles and 6 poles coils winding;
10. X and Y spindle of wire hooker and wire cutter adopts servo
system. It can adjust the length of bridge wire and lead wire.
11. Tooling sunk adopts servo system. The max segment number of
tooling sunk is 6.
12. The stator winding machine can wind single or multiple wires
13. And it is endowed with the display function of dynamic turns,
actual turns, set turns, failure causes and position self-check.
14. Free of enamel damage and wire snap. Once the copper wire is
run out, machine will automatically stop.
15. The automatic coil winding Machine has no distinct vibration
16. The stator winding machine saves labor and has high efficiency.
The automatic stator winding machine is suitable single phase
induction motor and three phase motor manufacturing ,and mainly
used in the field of household appliances, such as washing machine,
fan, refrigerator, air conditioner, recorder, video recorder, video
player, vacuum cleaner, camera, hair dryer, electric shaver, etc.
1. Before running machine, check the automatic stator winding
machine mechanical parts, electric, hydraulic parts, lubricating
parts, and check if the fastener loosen, running parts make any
noise and electric parts running normally or not. After checking
ok, machine can be running.
2. After stator winding machine working, clear the dust and reset
3. Clear the electric elements every three month.
4. Check if there is water in the filter of hydraulic parts. If
yes, please drain away water on time.
5. Check if there is oil on the lubricator of hydraulic parts. If
no oil, please add oil on time.
6. Check if lubricating status of guide mechanism. If no
lubricating oil, please add lubricating oil on time.
7. Please check the magnet valve screw and pipe joint every three
8. Please check the filter and air filter every two month.
9. Please check the air pressure very year once.
10. Add mechanical oil